Conversion Varnish Catalyst - 369g
Conversion Varnish is a two-component post catalysed urethane topcoat suitable for bar tops and commercial applications where ultimate durability is necessary. General Finishes Conversion Varnish has a 6-8 hour pot life once catalysed and can be re-coated in 1-2 hours. Note our Conversion Varnish includes this Catalyst. Order this only if you require extra Catalyst.
Furniture Care and Maintenance
Cure First
You have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure before cleaning.
Regular Cleaning and Maintenance
- Remove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.
- Remove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original lustre.
- As with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.
- Clean up water, alcohol and food spills in a timely manner and use placemats & coasters to protect the finish.
- Future finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.
- Avoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.
Technical Data Sheet (TDS)
Safety Data Sheet (SDS)
Conversion Varnish Flat - 2018-06
Conversion Varnish-Satin - 2018-06
Conversion Varnish Semi-Gloss - 2018-06
Conversion Varnish Gloss - 2018-06
NCO Catalyst - 2018-08
